DS PH100M Gent Quartz, Blue, 316L stainless steel, 40.5mm
Reference: C044.410.18.040.00

CHF 395.-
?
The watches in the DS PH collection have a rich heritage. They are the legitimate successors of the extremely robust timepieces of the 1960s which attract attention through their maritime characteristics and sporty, elegant design.

Variants

Technical specifications

Reference
C044.410.18.040.00
Warranty
2-year warranty
Weight net
75.00g
Color
Blue
Material
Super-LumiNova
Type
Quartz
Model
F07.412
Features
Quartz
PrecidriveTM
End of life
ETA
Swiss Made
Material
NATO
Buckle material
316L stainless steel
Reference
C044.410.18.040.00
Warranty
2-year warranty
Weight net
75.00g
Case material
316L stainless steel
Bezel material
316L stainless steel
Aluminium
Super-LumiNova
Glass
Antireflection treatment on one side
Sapphire crystal
Water resistance
Up to a pressure of 10 bar (100 m)
Diameter
40.50mm
Height
9.60mm
Between lugs
20.00mm
Color
Blue
Material
Super-LumiNova
Type
Quartz
Model
F07.412
Features
Quartz
PrecidriveTM
End of life
ETA
Swiss Made
Material
NATO
Buckle material
316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal