DS Jubile

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel

Reference: C902.451.46.011.00

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #2

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #2

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel - #6

DS Jubile

Men watch ∙ Quartz ∙ White ∙ 316L stainless steel

Reference: C902.451.46.011.00

DKK 12 300.-

Buy online

Reserve in boutique

This magnificent men's timepiece consists of a high-quality exterior and offers maximum precision. It features a fine 18 carat yellow gold bezel and is driven by an innovative PrecidriveTM quartz movement which is COSC-certified.

Technical specifications

DS Concept

DS Concept Standard

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C902.451.46.011.00

Warranty

3-year warranty

Weight net

60.00g

Case

Case material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Bezel material

18 ct gold

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 10 bar (100 m)

This information about the water resistance states the specified overpressure and diving depth to which a watch can be subjected and still remain in working order. As a general rule, we do not recommend wearing watches that are water-resistant to less than 10 bar (100 m) when swimming or diving. All Certina timepieces can withstand a pressure of at least 10 bar (100 m) stand - some of our watches can even withstand considerably higher pressures!

Diameter

40.00mm

Height

7.75mm

Between lugs

20.00mm

Dial

Color

White

Movement

Type

Quartz

Model

E64.111

Features

Quartz

PrecidriveTM

The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

Chronometer

A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.

ETA

Swiss Made

Bracelet

Material

Leather

Buckle material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Materials

Stainless steel

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

Sapphire crystal

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

Stainless steel
Sapphire crystal

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.