DS PH100M Lady

Women watch ∙ Quartz ∙ Black ∙ Mother of pearl ∙ Super-LumiNova ∙ Leather

Reference: C044.210.26.051.00
DKK 3 600.-
?
The watches in the DS PH collection have a rich heritage. They are the legitimate successors of the extremely robust timepieces of the 1960s which attract attention through their maritime characteristics and sporty, elegant design.

Variants

Technical specifications

Reference
C044.210.26.051.00
Warranty
2-year warranty
Weight net
60.00g
Color
Black
Material
Mother of pearl
Super-LumiNova
Material
Leather
Buckle material
316L stainless steel
Reference
C044.210.26.051.00
Warranty
2-year warranty
Weight net
60.00g
Case material
316L stainless steel
PVD coating
Bezel material
316L stainless steel
Aluminium
PVD coating
Super-LumiNova
Glass
Antireflection treatment on one side
Sapphire crystal
Water resistance
Up to a pressure of 10 bar (100 m)
Diameter
37.50mm
Height
9.60mm
Between lugs
18.00mm
Color
Black
Material
Mother of pearl
Super-LumiNova
Material
Leather
Buckle material
316L stainless steel

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

PVD

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

aluminum

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

PVD

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal