DS-7 Powermatic 80

Unisex watch ∙ Automatic ∙ PVD coating ∙ 316L stainless steel

Reference: C043.407.33.361.00
DS-7 Powermatic 80

Unisex watch ∙ Automatic ∙ PVD coating ∙ 316L stainless steel

Reference: C043.407.33.361.00
EUR 950.-
?
Recommended retail price (VAT included)
Buy online
Reserve in boutique
With hours, minutes, seconds and a date display, this new mechanical model appears in a 39 mm case. Inside is a Powermatic 80 movement with antimagnetic NivachronTM hairspring, easily admired through the sapphire crystal case back. On the front, coloured dials add a fresh look. Striking indexes and hands provide clarity, assured even in the dark thanks to comprehensive coating with Super-LumiNova®. An entirely new design for the bracelet has it appear to flow directly into the case, highlighting the style and high-end quality of the watch.

Technical specifications

Case material
PVD coating
PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Bezel material
PVD coating
PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Up to a pressure of 10 bar (100 m)
This information about the water resistance states the specified overpressure and diving depth to which a watch can be subjected and still remain in working order. As a general rule, we do not recommend wearing watches that are water-resistant to less than 10 bar (100 m) when swimming or diving. All Certina timepieces can withstand a pressure of at least 10 bar (100 m) stand - some of our watches can even withstand considerably higher pressures!
Length
39.00mm
Width
39.00mm
Height
9.94mm
Between lugs
10.00mm
Product sheet
Unisex watch ∙ Automatic ∙ PVD coating ∙ 316L stainless steel - #0
DS-7 Powermatic 80
Unisex watch ∙ Automatic ∙ PVD coating ∙ 316L stainless steel
Buy online
Reserve in boutique
DS-7 Powermatic 80

Materials

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.