DS Action Lady Diamonds

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium

Reference: C032.051.44.046.00

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #0

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #0

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #4

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #0

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #4

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #6

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium - #5

DS Action Lady Diamonds

Women watch ∙ Quartz ∙ Blue ∙ PVD coating ∙ Titanium

Reference: C032.051.44.046.00

DKK 5 900.-

Buy online

Reserve in boutique

The DS Action Lady is more than just a thing of beauty. Its Precidrive™ quartz calibre has been certified as a chronometer by the prestigious COSC testing institute. And as if that weren't enough, the watch is also water-resistant up to 20 bar. Make no mistake, there's more to this Lady than meets the eye.

Technical specifications

DS Concept

DS Concept Standard

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C032.051.44.046.00

Warranty

3-year warranty

Weight net

62.00g

Case

Case material

PVD coating

PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Bezel material

PVD coating

PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 20 bar (200 m)

Diameter

33.80mm

Height

9.13mm

Between lugs

15.00mm

Dial

Color

Blue

Material

Diamond(s)

It is rightfully considered to be the king of gemstones: Diamond is the hardest natural material in the world. Rough diamonds are polished for use in the watch and jewellery industry and assessed by means of the four "C" criteria: Cut: The cut refers to the individual shape of the diamond. The more meticulously and professionally the stone has been faceted, the more intensively it reflects the light. Certina uses brilliant-cut diamonds for the case and octagon-cut ones for the dial. Colour: At first glance, you would be forgiven for thinking that all diamonds are white. However, experts distinguish between fine nuances in shades - Certina only uses Top Wesselton diamonds. Clarity: Almost every diamond has minimal inclusions which can be detected by a professional through a magnifying glass but are usually invisible to the naked eye. Certina processes diamonds from the coveted VSI (very small inclusions) grade. Carat: The carat is the unit that defines the weight of a diamond. One carat is equal to 0.2 g. The diamonds used by Certina have different carat numbers depending on the model - they are noted for each watch in the sales manual. Certina only uses diamonds which fulfil the conditions of the Kimberley Process, an international system for certifying rough diamonds. It helps to prevent trade in smuggled diamonds - referred to as "blood diamonds" - which are used to finance wars.

Movement

Type

Quartz

Model

F06.412

Features

Quartz

PrecidriveTM

The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

Chronometer

A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.

ETA

Swiss Made

Bracelet

Material

PVD coating

PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Buckle material

PVD coating

PVD is the abbreviation for physical vapour deposition and refers to an extremely modern coating method by means of which a material, for instance gold, can be transferred to your choice of steel or titanium workpiece in vapour form. The result is as fine as it is durable: PVD is resistant, corrosion-resistant and very hard.

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

DS Action Lady Diamonds

Materials

Titanium

titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light – approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

PVD

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

Diamonds

diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

Sapphire crystal

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light – approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.