DS Action

Men watch ∙ Quartz ∙ Grey ∙ Titanium

Reference: C032.451.44.087.00

Men watch ∙ Quartz ∙ Grey ∙ Titanium - #0

Men watch ∙ Quartz ∙ Grey ∙ Titanium - #0

Men watch ∙ Quartz ∙ Grey ∙ Titanium - #0

Men watch ∙ Quartz ∙ Grey ∙ Titanium - #2

DS Action

Men watch ∙ Quartz ∙ Grey ∙ Titanium

Reference: C032.451.44.087.00

CHF 780.-

Reserve in boutique

Official store

Free delivery

Free returns

Secure payment

Swiss made

Why be satisfied with less? The DS Action accepts no compromises. With its robust workmanship, water resistance up to 30 bar (300 meters) and the official COSC Chronometer certificate, this watch leaves nothing to be desired.

Technical specifications

DS Concept

DS Concept Standard

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C032.451.44.087.00

Warranty

3-year warranty

Weight net

115.00g

Case

Case material

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Bezel material

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: Three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only: Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be coloured in any colour you choose too.

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 30 bar (300 m)

Diameter

43.00mm

Height

13.67mm

Between lugs

21.00mm

Dial

Color

Grey

Material

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Movement

Type

Quartz

Model

F07.412

Features

Quartz

PrecidriveTM

The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

Chronometer

A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.

ETA

Swiss Made

Bracelet

Material

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Buckle material

Titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light - approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Buckle features

Diver extension

Materials

Titanium

titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light – approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

Aluminium

aluminum

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

Super-LumiNova®

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

Sapphire crystal

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

titanium

Titanium is a metallic element which is not only extremely robust, hypoallergenic and corrosion-resistant, but also particularly light – approximately half as heavy as steel. This is why Certina uses it to manufacture particularly comfortable cases, bracelets and clasps.

aluminum

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.