DS SUPER PH1000M STC

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel

Reference: C024.907.17.041.10
DS SUPER PH1000M STC

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel

Reference: C024.907.17.041.10
NOK 12 930.-
?
Recommended retail price (VAT included)
Reserve in boutique

Official store

Free delivery* *Free delivery for order over 999 NOK

Free returns

Secure payment

Swiss made

With its latest timepiece, Swiss watch brand Certina reaffirms its unwavering passion for the depths of the oceans. The DS SUPER PH1000M first appeared in 1970, causing a sensation both above and below the water. The distinctive wristwatches are powered by a cutting-edge automatic caliber with an 80-hour power reserve and NivachronTM balance spring.

Technical specifications

Case material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Bezel material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Aluminium
Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: Three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only: Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be coloured in any colour you choose too.
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Up to a pressure of 100 bar (1000 m)
Length
43.50mm
Width
43.50mm
Height
14.15mm
Between lugs
20.00mm
Product sheet
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #0
DS SUPER PH1000M STC
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel
Reserve in boutique
DS SUPER PH1000M STC

Materials

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

aluminum

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

aluminum

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only. Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be produced in any colour chosen by the designers.

super-luminova

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

More about this model

Partner of Sea Turtle Conservancy

In 2017, Certina became a proud partner of the Sea Turtle Conservancy. The Florida-based organisation, whose primary aim is to ensure the survival of the sea turtle and conserve its habitats in the Caribbean, was founded in 1959 - the same year that Certina developed the ultra-resistant DS Concept.

Certina partner of Sea Turtle Conservancy

Special packaging

A special timepiece deserves a very special setting: This watch is presented in high-quality special packaging that not only protects it securely, but also emphasises its individual character.

Special packaging DS SUPER PH1000M STC

Partner of Sea Turtle Conservancy

In 2017, Certina became a proud partner of the Sea Turtle Conservancy. The Florida-based organisation, whose primary aim is to ensure the survival of the sea turtle and conserve its habitats in the Caribbean, was founded in 1959 - the same year that Certina developed the ultra-resistant DS Concept.

Certina partner of Sea Turtle Conservancy

Special packaging

A special timepiece deserves a very special setting: This watch is presented in high-quality special packaging that not only protects it securely, but also emphasises its individual character.

Special packaging DS SUPER PH1000M STC