DS PH100M Gent

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel

Reference: C044.410.18.040.00

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #0

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #2

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #4

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #6

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel - #5

DS PH100M Gent

Men watch ∙ Quartz ∙ Blue ∙ 316L stainless steel

Reference: C044.410.18.040.00

CHF 395.-

Find a store

The watches in the DS PH collection have a rich heritage. They are the legitimate successors of the extremely robust timepieces of the 1960s which attract attention through their maritime characteristics and sporty, elegant design.

Technical specifications

DS Concept

DS Concept Standard

1. Sapphire crystal, extremely scratch-resistant
2. O-ring seal on the setting stem
3. Reinforced case back

Watch info

Reference

C044.410.18.040.00

Warranty

2-year warranty

Weight net

75.00g

Case

Case material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Bezel material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.

Aluminium

Aluminium is very neutral, hypoallergenic, corrosion-resistant and temperature-resistant. However, above all, it is extremely lightweight: Three times lighter than stainless steel and around one and a half times lighter than titanium. These are some of the qualities used by Certina for manufacturing extremely lightweight cases and clasps. The brand uses anodised aluminium only: Not only does this extremely durable protective layer enable the material to be additionally hardened, it allows it to be coloured in any colour you choose too.

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Glass

Antireflection treatment on one side

It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.

Water resistance

Up to a pressure of 10 bar (100 m)

This information about the water resistance states the specified overpressure and diving depth to which a watch can be subjected and still remain in working order. As a general rule, we do not recommend wearing watches that are water-resistant to less than 10 bar (100 m) when swimming or diving. All Certina timepieces can withstand a pressure of at least 10 bar (100 m) stand - some of our watches can even withstand considerably higher pressures!

Length

40.50mm

Width

40.50mm

Height

9.60mm

Between lugs

20.00mm

Dial

Color

Blue

Material

Super-LumiNova

SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.

Movement

Type

Quartz

Model

F07.412

Features

Quartz

PrecidriveTM

The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.

End of life

Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.

ETA

Swiss Made

Bracelet

Strap back

Fabric

Strap front

Fabric

Material

NATO

Buckle material

316L stainless steel

The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.